Rack Mounting - Rear - ATEN Altusen KN1108v User Manual

KVM Over the NET™ User Manual

Rack Mounting - Rear

To mount the unit at the rear of the rack, do the following:
1. Remove the two screws at the rear of the unit.
2. Use the M3 x 8 Phillips head hex screws supplied with the rack mounting
kit to screw the rack mounting brackets into the rear of the unit.
3. Position the device in the rack and align the holes in the mounting brackets
with the holes in the rack.
17
Phillips head hex
M3 x 6
Phillips head hex
M3 x 8