Sun Systems; Mac Systems - ATEN Altusen KN1108v User Manual

Sun Systems

Problem
Video display problems with
HDB15 interface systems
(e.g. Sun Blade 1000
servers).*
Video display problems with
13W3 interface systems
(e.g. Sun Ultra servers).*
I have a KA9131 USB
adapter. Will it work with the
KVM Over the NET™
switch?
* These solutions work for most common Sun VGA cards. If using them fails
to resolve the problem, consult the Sun VGA card's manual.

Mac Systems

Problem
When I log in to the KVM
Over the NET™ switch with
my Safari browser, it hangs
when I use the Snapshot
feature.
The display resolution should be set to 1024 x 768 @
60Hz:
Under Text Mode:
Go to OK mode and issue the following commands:
setenv output-device screen:r1024x768x60
reset-all
Under XWindow:
1. Open a console and issue the following command:
m64config -res 1024x768x60
2. Log out
3. Log in
The display resolution should be set to 1024 x 768 @
60Hz:
Under Text Mode:
Go to OK mode and issue the following commands:
setenv output-device screen:r1024x768x60
reset-all
Under XWindow:
1. Open a console and issue the following command:
fbconfig -res 1024x768x60
2. Log out
3. Log in
Yes. Although we recommend the KA9170 for new
purchases, if you already have a KA9131 you can use it
instead of the KA9170.
Force close Safari, then reopen it. Don't use the
Snapshot feature in the future.
To use the Snapshot feature with Safari, upgrade to Mac
OS 10.4.11 and Safari 3.0.4.
Resolution
Resolution
Appendix
222