Adapter Firmware Upgrade
The Upgrade Adapters page is used to upgrade the firmware of the KVM
Adapter Cables.
To perform the upgrades, do the following:
1. Log in to the KN1108v / KN1116v; click the Maintenance tab; select the
Upgrade Adapters menu item:
2. Click Adapter Firmware Info to bring up a list of the adapter firmware
versions that are stored in the main firmware. If you upgraded the main
firmware, it may contain newer versions of the adapter firmware than the
versions currently on the adapters.
3. Compare the adapter firmware versions stored in the main firmware with
the versions listed in the F/W Version column of the Main Panel. If the
versions stored in the firmware are newer than the ones on the adapters,
you will probably want to perform the adapter upgrade.
4. In the Name column of the Main Panel, check the ports whose Adapters
you want to upgrade.
Chapter 10. Maintenance
182