Setting The Alarm Times - Grundig CDS 3000 DEC User Manual

SETTINGS
Manual station search
1 Press »
5 a
frequency up in steps.
– Display: the frequency changes in 50 kHz steps (FM) and
9 kHz steps (MW).
Storing stations as presets
You can store a total of 20 radio stations – 10 on FM and 10 on
MW band.
Press »TUNER« to select the frequency band (FM or MW).
1
Select the radio station as described.
2
3 Activate the memory function by pressing »PROG«.
– Display: »
Select the preset by pressing »PRESET« as often as necessary
4
and press »PROG« to confirm.
– Display: for example, »
Note:
If stations are already stored on the presets, they are over-
written when new stations are stored.
5 To store more stations, repeat steps

Setting the alarm times

You can have the radio, CD, USB or a signal tone as an alarm. The
clock must be set before you can set the alarm time. You can make
the setting in standby mode. When this setting is being made, if no
button is pushed for more than 10 seconds, the hi-fi system will end
the process automatically. You then have to start again.
Hold down
1
CHECK/SET« until »
hours are flashing in the display.
Set the hours with »
2
»ALARM1
– Display: the minutes flash.
______________________________________________
« or » s 6 « briefly several times to move the
« flashes.
»ALARM1 CHECK/SET« or
« or »
« or »
5 a
CHECK/SET« or »ALARM2
«.
2 to 4.
»ALARM2
« appear and the
« and confirm with
s 6
CHECK/SET«.
17