Connecting External Devices - Grundig CDS 3000 DEC User Manual

Hifi micro system
Table of Contents

Advertisement

ON/OFF
CD
FLASH
PROG
TUNER
AUX
RESET
EQ
ST/MO
Reset
MW Antenna
FM Antenna
To Subwoofer
Aux Out
Battery
(75Ω)
ON/OFF
CD
FLASH
PROG
TUNER
AUX
RESET
Reset
MW Antenna
FM Antenna
To Subwoofer
Aux Out
(75Ω)
14
CONNECTION AND PREPARATION

Connecting external devices

Connect the audio output of the external device to the audio
1
input socket
jack plug (3.5 mm).
2
Connect the audio output socket
the hi-fi system to the audio input socket of the external device
with a stereo jack plug (3.5 mm).
Note:
Switch the hi-fi system off before you connect external devices.
Connecting an MP3 player
The hi-fi system supports most MP3 players.
1
Switch off the hi-fi system.
Plug the USB cable of the MP3 player into the USB interface
2
»
Note:
Switch off the hi-fi system before you pull out the USB cable.
Inserting the back-up batteriy
During mains operation, the back-up battery ensures that stored set-
tings are not lost in the case of a power failure or when the device is
briefly disconnected from the mains.
Open the »Battery« compartment on the back of the hi-fi
1
system by pressing down on the cover.
2
When inserting the batteriy (1 x CR2032, 3 V, lithium), make
sure the positive terminal (+) is facing upwards (see the marking
on the cover).
Close the battery compartment by putting on the lid and push-
3
Battery
ing it upwards.
Notes:
Battery
Do not expose the battery to extreme heat, caused for example
by direct sunlight, heaters or fire.
Take out the back-up battery when you know that the device will
not be used for a long period of time. The manufacturer accepts
no liability for damage caused by leaking batteries.
»Aux
In« on top of the hi-fi system using a stereo
« on top of the hi-fi system.
»Aux
Out« on the back of

Advertisement

Table of Contents
loading

Table of Contents