Table of Contents
Advertisement
16
SETTINGS
Setting the time
When connecting up the hi-fi system to the main power supply for
the first time, switch to standby mode. The clock flashes in the dis-
play to indicate that it needs to be set. When this setting is being
made, if no button is pushed for more than 10 seconds, the hi-fi sys-
tem will end the process automatically. You then have to start again.
Hold down »CLOCK« on the hi-fi until »
1
the display.
2
Press »
5 a
format and press »CLOCK« to confirm.
– Display: the hours flash.
Set the hours with »
3
»CLOCK«.
– Display: the minutes flash.
Set the minutes with »
4
»CLOCK«.
– Display: for example, »
To activate the RDS time synchronisation, select »
5
»
« »
s 6
Note:
Some RDS stations transmit an RDS time signal. If the selected
RDS station transmits this time information, the clock is updated
automatically if the RDS time synchronisation (»
vated. This takes about five minutes.
Tuning and storing radio stations
Automatic station search
1
Switch the hi-fi system on from standby mode by pressing
»TUNER«.
2
Press »TUNER« to select the frequency band (FM or MW).
– Display: »
Activate the station search by pressing and holding down
3
»
« or »
5 a
run-through.
– The search stops when a channel is found.
______________________________________________
« or »
s 6
« to select between 12 and 24 hour clock
« or »
5 a
« or »
5 a
«.
« and press »CLOCK« to confirm.
« or »
«.
« until the frequency display changes to rapid
s 6
« appears in
« and confirm with
s 6
« and confirm with
s 6
« or
5 a
«) is acti-
Advertisement
Table of Contents
