Configuring Network Interworking - Alcatel Speed Touch 591s Technical User's Manual

Procedure 6-5 Configuring policing
CONFIG — CONNECT — <endpoint> — TRAFFIC — FROM_1 2 — POLICING — ENABLE*
or DISABLE
where endpoint is in the format <U;S1/Ddlci> or <U;Ddlci>, and dlci is a value from 16 to
1007, or <N;0/vci>, and vci is a VCI number from 32 to 157
For further information on policing, refer to Alcatel 7350 ASAM Technical Practices.
Procedure 6-6 Configuring rates
CONFIG — CONNECT — <endpoint>
Be or CIR=Bc — <value>K
where
endpoint is in the format <U;S1/Ddlci> or <U;Ddlci>, and dlci is a value from 16 to 1007,
or <N;0/vci>, and vci is a VCI number from 32 to 157
value is the desired rate in kb/s
6.3

Configuring network interworking

Table 6-2 lists the network interworking parameters that can be configured on the
Speed Touch 591s.
Speed Touch 591s Technical Practices
February 2001 90-8785-01
— TRAFFIC — FROM_1 2 — RATES — CIR or Bc or
Table 6-2 Network interworking parameters
Parameter Options
PVC management Enable, Disable
DE mapping DE=CLP
DE=FR_SSCS
CLP mapping CLP=DE
CLP=0
CLP=1
NIWF DLCI 16 to 991
1022
6 — Configuring frame relay connections
Default value
Enable
DE=CLP
CLP=DE
1022
6-5