Table of Contents
Advertisement
6.2 SpeedTouch™ Default Configuration
Reset to default
configuration
User configuration
profile
E-SIT-CTC-20030605-0003 v1.0
Proceed as follows to perform a hardware reset to factory defaults:
1
Make sure the SpeedTouch™ is powered on.
2
Use a pencil to press the Defaults button at the back of the SpeedTouch™ until all
the LEDs on the front panel start flashing.
3
Release the button. The SpeedTouch™ reboots and will come online again with
factory defaults.
When you reset the SpeedTouch™ to its factory defaults, all the configuration profile
settings you might have changed will be deleted. It may be necessary to:
•
reconfigure the system by using the SpeedTouch™ Setup wizard
or
•
upload the relevant configuration file. See
Setup" on page 7
for more information.
6 Troubleshooting
Defaults button
"1.3 SpeedTouch™ Configuration
67
Hide quick links:
Advertisement
Table of Contents
