THOMSON SPEEDTOUCH 605S Setup And User Manual page 45

IP Routing
E-SIT-CTC-20030605-0003 v1.0
Click this link to display the IP Routing page.
This page allows you to view or add/delete static IP routes for SpeedTouch™'s IP
router:
Routing can be useful when subnetting your local network. To add a static IP route
proceed as follows:
1 Click New.
2 Specify the destination IP address (use the prefix notation to apply a subnetmask),
Gateway, Interface and Metric.
Note If applicable, you can also select a label for packet classified IP Routing.
3 Click Apply to add the entry to the table.
4 Click Save all to save your changes to persistent memory.
3 SpeedTouch™ Web Interface
41