THOMSON SPEEDTOUCH 605S Setup And User Manual page 43

E-SIT-CTC-20030605-0003 v1.0
5 In a final step all configurations are applied to the SpeedTouch™:
6 The SpeedTouch™ Setup Wizard appears again to announce that the configura-
tion has been successful:
Click Finish to close the wizard.
Most configuration profiles will enable SpeedTouch™'s DHCP server - and a PC's
Ethernet port is configured as DHCP client by default. Therefore, in most cases, no
additional configuration of your PCs must be done if you want to enable multiple PCs
on your local network for accessing the Internet via the SpeedTouch™.
3 SpeedTouch™ Web Interface
39