The Speedtouch™ Upgrade Wizard - THOMSON SPEEDTOUCH 605S Setup And User Manual

5 SpeedTouch™ System Software Upgrade
5.1 The SpeedTouch™ Upgrade Wizard
Using the Upgrade
Wizard
Before you start
System software
upgrade procedure
58
The procedure described in this section are valid only in case you run an MS Windows
Operating System or Mac OS X 10.1/10.2.
During the upgrade procedure all configuration settings are backed up by the wizard
and restored after upgrading the system software. Therefore, you do not need to back
up the SpeedTouch™ configuration yourself.
Make sure that you have a valid SpeedTouch™ system software file available on a local
disk or CD-ROM.
Following procedure describes how to use the SpeedTouch™ Upgrade wizard from a
PC running a MS Windows OS. For computers running Mac OS10 the behavior of the
wizard is identical.
Proceed as follows:
1 Insert the SpeedTouch™ Setup CD-ROM in your computer's CD-ROM drive.
• MS Windows OSs
The SpeedTouch™ CD Browser will start automatically:
If the SpeedTouch™ CD Browser window does not appear automatically,
open a 'Run' window via Start > Run from the Start menu and enter the
following path: D:\Menu.exe, where D stands for the drive letter of your
CD-ROM drive.
The wizard prompts you to select a language. Select the language of your
choice and click OK.
To start the SpeedTouch™ Upgrade wizard, click Diagnostics & Maintenance
and then click Upgrade My SpeedTouch™.
• Mac OS10.1/10.2
Open the CD-ROM and click UpgradeST to install the upgrade program.
After installation, go to applications:SpeedTouch on the OS X partition and
double-click UpgradeST.
E-SIT-CTC-20030605-0003 v1.0