THOMSON SPEEDTOUCH 605S Setup And User Manual page 17

E-SIT-CTC-20030605-0003 v1.0
6 The SpeedTouch™ Setup wizard will appear again to announce that the configura-
tion has been successful:
Click Finish to close the wizard.
Note In some cases, the SpeedTouch™ Setup wizard may ask you to restart
your computer.
Most configuration profiles will enable SpeedTouch™'s DHCP server - and a PC's
Ethernet port is configured as DHCP client by default. Therefore, in most cases, no
additional configuration of your PCs must be done if you want to enable multiple PCs
on your local network for accessing the Internet via the SpeedTouch™.
To make sure that all PCs are configured as expected (DHCP or fixed IP addresses) you
can re-run the SpeedTouch™ Setup wizard on every PC and select the Change the LAN
configuration option.
For fixed IP configurations, or other advanced settings, please follow the instructions
provided by your ISP or network administrator.
1 SpeedTouch™ Installation
13