Accessing The System Board To Install Internal Options - Lexmark X860DE User Manual
X86x series
Hide thumbs
Also See for X860DE:
- Service manual (43 pages) ,
- User manual (315 pages) ,
- Technical reference manual (106 pages)
Table of Contents
Advertisement
Additional printer setup
Accessing the system board to install internal options
Note: This task requires a flathead screwdriver.
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory
devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the
wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well,
and unplug any cables going into the printer.
1
Loosen the screw(s) on the access panel located on the back of the printer.
2
Remove the panel from the printer, and set it aside.
26
Advertisement
Table of Contents
