Network Reports Menu; Network Card Menu - Lexmark X860DE User Manual

Understanding printer menus
Menu item
Job Buffering
Off
On
Auto
Mac Binary PS
Auto
Off
On
USB With ENA
ENA Address
ENA Netmask
ENA Gateway

Network Reports menu

This menu is available from the Network/Ports menu:
Network/Ports > Standard Network or Network <x> > Std Network Setup or Net <x> Setup > Reports or Network
Reports
Menu item
Print Setup Page
Print NetWare Setup
Page

Network Card menu

This menu is available from the Network/Ports menu:
Network/Ports > Standard Network or Network <x> > Std Network Setup or Net <x> Setup > Network Card
Menu item
View Card Status
Connected
Disconnected
Description
Temporarily stores jobs on the printer hard disk before printing
Notes:
•
Off is the factory default setting.
•
The On setting buffers jobs on the printer hard disk.
•
The Auto setting buffers print jobs only if the printer is busy processing data
from another input port.
•
Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is updated.
Sets the printer to process Macintosh binary PostScript print jobs
Notes:
•
Auto is the factory default setting.
• The Off setting filters print jobs using the standard protocol.
•
The On setting processes raw binary PostScript print jobs.
Sets the network address, netmask, or gateway information for an external print
server that is attached to the printer using a USB cable.
Note: This menu item is available only if the printer is attached to an external print
server through the USB port.
Description
Prints a report containing information about the current network setup
Notes:
•
The Setup Page contains information about the network printer settings, such as the
TCP/IP address.
•
The NetWare Setup Page menu item appears only on models that support NetWare and
shows information about NetWare settings.
Description
Lets you view the connection status of the Network Card
145