Network Reports Menu - Lexmark X204N - X B/W Laser User Manual

Menu item
NPA Mode
Off
Auto
Network Buffer
Auto
3K to <maximum size allowed>
Mac Binary PS
On
Off
Auto
Std Network Setup
Reports
Network Card
TCP/IP
IPv6
Net <x> Setup
Reports
Network Card
TCP/IP
IPv6

Network Reports menu

This menu is available from the Network/Ports menu:
Description
Sets the printer to perform the special processing required for bidirectional
communication following the conventions defined by the NPA protocol
Notes:
•
Auto is the factory default setting.
•
Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is updated.
Sets the size of the network input buffer
Notes:
•
Auto is the factory default setting.
•
The value can be changed in 1-K increments.
•
The maximum size allowed depends on the amount of memory in the printer,
the size of the other link buffers, and whether Resource Save is set to On or
Off.
•
To increase the maximum size range for the Network Buffer, disable or reduce
the size of the USB buffer.
•
Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is updated.
Sets the printer to process Macintosh binary PostScript print jobs
Notes:
•
Auto is the factory default setting.
•
The Off setting filters print jobs using the standard protocol.
•
The On setting processes raw binary PostScript print jobs.
For descriptions and settings of the network setup menus, see the following:
•
"Network Reports menu" on page 106
•
"Network Card menu" on page 107
•
"TCP/IP menu" on page 107
•
"IPv6 menu" on page 108
Understanding printer menus
106