Access Control - Planet XRT-501 User Manual

3.8 QoS
3.9 Streaming
Accelerator
3.10 IGMP
3.11 Packet Capture
3.12 WAN Port
Select one of the above advance features selections and proceed to the manual's relevant
subsection.

3.1 Access Control

The Access Control feature allows administrators to restrict the level of Internet Access
available to PCs on your LAN. With the default settings, everyone has unrestricted Internet
access.
To use this feature:
Set the desired restrictions on the "Default" group. All PCs are in the "Default" group
unless explicitly moved to another group.
Set the desired restrictions on the other groups ("Group 1", "Group 2", "Group 3" and
"Group 4") as needed.
Assign PC to the groups as required.
Restrictions are imposed by blocking "Services", or types of connections.
All common Services are Pre-Defined.If required, you can also define your
Note
own Services.
allows you to specify what user/packet can pass your router's
NAT.
You can configure the QoS control by four level.
Thist will get accelerate via enable this function.
IGMP (Internet Group Multicast Protocol): It is a session-layer
protocol used to establish membership in a multicast group.
It provides the feauture can monitor the LAN or WAN traffic.
This section allows you to select the connection method in
order to establish a connection with your ISP (same as the
Wizard section)
39