Routing - Planet XRT-501 User Manual

Current IP
Address
To connect from a remote PC via the Internet
Ensure your Internet connection is established, and start your Web Browser.
In the "Address" bar, enter "HTTP://" followed by the Internet IP Address of the XRT-501. If
the port number is not 80, the port number is also required. (After the IP Address, enter
":" followed by the port number.)
e.g.
http://test.dyndns.org:8080
This example assumes the WAN IP Address is PPPoE, and the port number is 8080.

4.7 Routing

Overview
If you don't have other Routers or Gateways on your LAN, you can ignore the "Routing"
page completely.
ip_address is the Internet IP address of this device.
port_number is the port number assigned on this screen.
You should then be prompted for the password for this device.
(You must assign a password!)
To manage this device via the Internet, you need to know the
IP Address of this device, as seen from the Internet. This IP
Address is allocated by your ISP, and is shown here. But if
using a Dynamic IP Address, this value can change each time
you connect to your ISP. There are 2 solutions to this problem:
Have your ISP allocate you a Fixed IP address.
Use the DDNS feature (Advanced menu) so you can
connect using a Domain Name, rather than an IP address.
77