Connection Status - L2Tp - Planet XRT-501 User Manual

Disconnect
Clear Log
Refresh

Connection Status - L2TP

If using L2TP, a screen like the following example will be displayed when the "Connection
Details" button is clicked.
Parameter
Connection
Physical Address
IP Address
Connection Status
If connected to your ISP, hang up the connection.
Delete all data currently in the Log. This will make it
easier to read new messages.
Update the data on screen.
The hardware address of this device, as seen by remote
devices on the Internet. (This is different as the
hardware address by the devices on the local LAN.)
The IP Address of this device, as seen by Internet users.
This address is allocated by your ISP (Internet Service
Provider).
This indicates whether or not the connection is currently
established.
If the connection does not exist, the "Connect" button
can be used to establish a connection.
If the connection currently exists, the "Disconnect"
button can be used to break the connection.
34
Description