Connection Log
Connection Log
Buttons
Connect
Disconnect
Clear Log
Refresh
Connection Status - Telstra Big Pond
An example screen is shown below.
Parameter
Connection
Physical Address
IP Address
The Connection Log shows status messages relating to
the existing connection.
The "Clear Log" button will restart the Log, while the
Refresh button will update the messages shown on
screen.
If not connected, establish a connection to your ISP.
If connected to your ISP, hang up the connection.
Delete all data currently in the Log. This will make it
easier to read new messages.
Update the data on screen.
The hardware address of this device, as seen by remote
devices. (This is different as the hardware address by
the devices on the local LAN.)
The IP Address of this device, as seen by Internet users.
35
Description