Config File - Planet XRT-501 User Manual

4.7 Routing
4.8 Security
4.9 Upgrade
Firmware
4.10 Log Out

4.1 Config File

This feature allows you to download the current settings from the XRT-501, and save them
to a file on your PC. You can restore a previously-downloaded configuration file to the
XRT-501, by uploading it to the XRT-501.
This screen also allows you to set the XRT-501 back to its factory default configuration. Any
existing settings will be deleted.
An example Config File screen is shown below.
Parameter
Backup Config
Restore Config
Only required if your LAN has other Routers or Gateways.
Firewall and other security-related settings. Normally, the
default settings do not need to be changed.
Upgrade the Firmware (software) installed in your XRT-501
Router.
Logout XRT-501.
Use this to download a copy of the current configuration,
and store the file on your PC. Click Download to start the
download.
This allows you to restore a previously-saved
configuration file back to the XRT-501.
Click Browse to select the configuration file, then click
66
Description