Table of Contents
Advertisement
Source Mask
Source Port Range
Protocol ID
Vlan ID Range
IPP/DS Field
IP Precedence Range
Type of Service
DSCP Range
802.1p
3.5.4.2 Action
After finishing all rules detail condition setting, select the rule you want to execute and
action here.
The following table describes the labels in this screen.
Parameter
IPP/DS Field
IP Precedence
Remarking
Type of service
Remarking
DSCP Remarking
802.1p Remarking
Queue #
Set the subnet mask value that you want to filter in source
side
Set the port range value that you want to filter in source side
Set the protocol ID type that you want to filter
Set the VLAN value that you want to filter
Select IP QoS format
Select the IP precedence range
Select 5 different type of service
Set the DSCP value that you want to filter
Set the remarked new 802.1p priority value on the packet that
fulfill every detail setting condition of each rule
Description
Select IP QoS format
Select the remarking value of IP precedence
Select the remarking value of type of service
Select the remarking value of DSCP
Select the remarking value of 802.1p
Select four types of Queue: Low, Medium, High,
Highest
59
Advertisement
Table of Contents
