Table of Contents
Advertisement
3.4.2.2.1 DHCP Enable
The next screen will vary depending on the DHCP option you selected.
The following table describes the labels in this screen.
Parameter
Starting IP Address
IP Pool Count
Lease Time
DNS Relay
Primary DNS Server
Secondary DNS Server
3.4.2.2.2 DHCP Relay
A DHCP relay is a computer that forwards DHCP data between computers that request
IP addresses and the DHCP server that assigns the addresses. Each of the device's
interfaces can be configured as a DHCP relay. If it is enable, the DHCP requests from
local PCs will forward to the DHCP server runs on WAN side. To have this function
working properly, please run on router mode only, disable the DHCP server on the
LAN port, and make sure the routing table has the correct routing entry.
Description
Enter the starting IP address you wish to use as the DHCP
server's IP assignment.
Enter the maximum user pool size you wish to allow.
Enter the amount of time you wish to lease out a given IP
address.
Select the DNS relay option you wish to use from the
dropdown list.
Enter the primary DNS server IP address you wish to use.
For user discovered DNS only.
Enter the secondary DNS server IP address you wish to
use. For user discovered DNS only.
33
Advertisement
Table of Contents
