Table of Contents
Advertisement
Device
Use
Edit
Drop
[Add Route]
Select this option to set Static Routing information.
The following table describes the labels in this screen.
Parameter
Destination IP Address:
IP Subnet Mask
Gateway IP Address
Metric
Show the interface that go to the next hop (router),
such as LAN port.
The counter for access time.
Edit the route, this icon is not shown for system
default route.
Drop the route, this icon is not shown for system
default route.
Description
This parameter specifies the IP network address
of the final destination of packets routed by this
rule.
Enter the subnet mask for this destination.
Enter the IP address of the gateway. A gateway
does the actual forwarding of the packets. Enter
the gateway's IP address in the field or select
which PVC you wish to act as a gateway.
Metric represents the "cost" of transmission for
routing purposes. IP Routing uses hop count as
the measurement of cost, with a minimum of 1 for
45
Advertisement
Table of Contents
