Lan Configuration; Router Local Ip - Planet ADN-4000 User Manual

802.11n wireless adsl 2/2+ router

Hide thumbs Also See for ADN-4000:

Table of Contents

3.4.2 LAN Configuration

Go to Interface Setup -> LAN. The LAN option enables you to configure the LAN

port.

There are the IP settings of the LAN Interface for the device. These settings may be

referred to as Private settings. You may change the LAN IP address if needed. The

LAN IP address is provided to your internal network and cannot be seen on the Internet.

IP Address: Enter the IP address of your ADSL router in dotted decimal notation, for

example, 192.168.1.1 (default setting).

IP Subnet Mask: Your ADSL router will automatically calculate the subnet mask

based on the IP address that you assign. Unless you are implementing sub netting, use

the subnet mask computed by the ADSL router.

Dynamic Route: Select the Dynamic Route from RIP1, RIP2-B, and RIP2-M. Please

refer to

Dynamic

Routing. The only difference is the interface.

Table of Contents