Xerox WorkCentre 6605 User Manual page 254

Troubleshooting
Symptom
Color around the edge of
printing is incorrect.
Partial blanks, creased paper,
or blotted printing.
254 WorkCentre 6605 Color Multifunction Printer
User Guide
Probable Causes
The color registration is
incorrect.
The paper is damp.
The paper is outside the
recommended specification
range.
The printer is worn or
damaged.
The toner cartridges are not
®
Xerox toner cartridges.
The paper is impeded in the
paper path.
Condensation inside the printer
causes partial blanks or
creased paper.
Solutions
Adjust the color registration. For details, see
Color Registration on page 212.
Replace the paper.
Replace the paper with a recommended
size and type. For details, see
Paper on page 112.
For assistance, go to the Xerox
website at
www.xerox.com/office/WC6605support
Verify that the toner cartridges meet
specifications and replace if necessary. For
details, see Consumables
• Remove any paper or debris from the
paper path.
• Ensure that the trays are pushed in all
the way.
• Ensure that the rear cover is closed and
locked.
Turn on the printer and leave it on for at
least one hour to get rid of the
condensation. For assistance, go to the
®
Xerox Support website at
www.xerox.com/office/WC6605support
Supported
®
Support
on page 221.