Initializing The Print Meter; Resetting The Transfer Unit - Xerox WorkCentre 6605 User Manual

1. At the printer control panel, press the Machine Status button.
2. Touch Tools > Admin Settings.
3. Using the keypad, type the passcode as needed.
4. Touch Service Tools.
5. Touch Initialize NVM.
6. To select to reset the non-volatile memory, touch Fax Settings, Scan Settings or System
Settings.
7. Touch Initialize > Yes, Initialize.
To cancel, touch the X button or select No, Cancel.
8. To return to the Service Tools menu, press the Back arrow. To return to the Services Home
menu, press the Services Home button.

Initializing the Print Meter

The print meter records the total number of printed pages by user and paper size, and by total prints.
For each user, it also records the sheets printed by color, black only, and the total. To see the page
count since the last reset of the print meter, you can print the Print Volume Report from the
information pages. At the end of each accounting cycle, you can initialize the print meter to keep an
accurate accounting of the print volume by user.
To initialize the print meter:
1. At the printer control panel, press the Machine Status button.
2. Touch Tools > Admin Settings.
3. Using the keypad, type the passcode as needed.
4. Touch Service Tools.
5. Touch Initialize Print Meter.
6. Touch Initialize > Yes, Initialize.
To cancel, touch the X button or select No, Cancel.
7. To return to the Service Tools menu, press the Back arrow. To return to the Services Home
menu, press the Services Home button.

Resetting the Transfer Unit

The print meter keeps a count of the pages processed by the Transfer Unit. As the page count nears
the end of life for the transfer unit, a message appears to warn you to replace it soon. After the
transfer unit is replaced, reset the transfer unit so that the printer has an accurate page count for the
new unit.
To reset the transfer unit:
WorkCentre 6605 Color Multifunction Printer
Maintenance
217
User Guide