The Reboot Screen - ZyXEL Communications P-2601HN(L)-F1 Series User Manual

Reset to Factory Defaults
Click the Reset button to clear all user-entered configuration information and
return the ZyXEL Device to its factory defaults. The following warning screen
appears.
Figure 113 Reset Warning Message
Figure 114 Reset In Process Message
You can also press the RESET button on the rear panel to reset the factory
defaults of your ZyXEL Device. Refer to
information on the RESET button.

26.3 The Reboot Screen

System restart allows you to reboot the ZyXEL Device remotely without turning
the power off. You may need to do this if the ZyXEL Device hangs, for example.
Click Maintenance > Reboot. Click the Reboot button to have the ZyXEL Device
reboot. This does not affect the ZyXEL Device's configuration.
P-2601HN(L)-F1 Series User's Guide
Chapter 26 Backup/Restore
Section 1.6 on page 25 for more
231