Bobbin Winding; Placing The Bobbin In The Machine - Husqvarna Quilt Designer II User Manual

Bobbin Winding

1. Place an empty bob bin on the bobbin spindle at
the front of the machine (the mark
Bring the bobbin spindle down. A Pop-up menu
on the Touch Screen reminds you that bob bin
winding is engaged.
2. Place the large spool holder and a felt pad under
the thread on the auxiliary spool pin.
3. Bring the thread around thread tension disk (b)
pulling it fi rmly into the tension disk, then un der
thread guide (c) and over thread guide (d) as
illustrated.
4. From above wind a few turns of thread clock-wise
around the bobbin and into the thread cutter (e).
5. Press the foot control or touch
the bobbin is fi l led, the winding will stop
automatically. Rem ove the bobbin and cut off the
thread (e). Bring the bob bin spindle up.
Winding from the Needle
Make sure that the presser foot and the needle are
in the up position. Use only the original Husqvarna
Viking green bobbins.
Only use a metal presser foot when bob bin winding
from the needle.
To wind, fol low the instructions for "Bobbin
wind ing". The difference is that the thread is brought
up from the nee dle, un der the press er foot and to
the right over thread guide (d).
Note: We do not recommend winding specialty
threads such as invisible or other stretchy threads
through the needle. Instead see "Bobbin Winding".

Placing the Bobbin in the Machine

Turn off the main switch.
1. Remove the bobbin cover by sliding it towards
you.
2. Place the bobbin in the bobbin case with the
mark facing up and the thread to the left of
the bob bin. The bobbin will then rotate counter
clockwise while pulling out the thread.
3. Place your fi nger on the bobbin to keep it from
turning as you pull the thread fi rmly to the right
and then to the left into the tension spring (a) until
it ''clicks'' into place.
4. Continue threading around (b) and to the right of
the thread cutter (c). Replace the cover (1). Pull
the thread to the left to cut it (2).
Learn your Quilt Designer II
facing up).
b
. When
Bobbin winding from the spool
Bobbin winding from the needle
1.
3.
c
4.
b
a
e
d
d
2.
b
c
1
2
11