Husqvarna Quilt Designer II User Manual page 22

SET 5
Language
To change language on the Touch Screen, touch
until your lan guage choice is indicated.
The language setting remains until you change it.
Touch Screen Contrast
Touch or to reduce or increase Touch Screen
contrast.
Help Pop-up Menu
When is selected a Help Pop-up will appear
automatically with recommendations for your
sewing. The Pop-up menu only appears if a
recommendation is changed. Touch
to bring up the rec om men da tions only when you
need them by touch ing
SET 6
Calibration of the Touch Screen
If you touch a function or menu on the Touch Screen
but it does not respond, or if the function next to it is
activated instead, the screen has to be calibrated. The
Touch Screen is calibrated at the Husqvarna Viking
factory, but the settings may be affected when the
machine is shipped and transported. You only need
to calibrate the Touch Screen if there is a pre ci si on
problem when touching the tabs on the screen.
To calibrate the Touch Screen, open
and the calibration screen appears.
1. Touch in the center of cross 1. This is best done
with a pointed but not sharp object. When the
cross disappears the fi rst point is set.
2. Insert Stitch d-Card A
Card to set the second point.
You can touch to leave the Calibration screen
without saving any changes.
3. A new cross appear on the Touch Screen. Touch
in the center of this cross to complete the
calibration.
Note: When calibrating the screen, be sure to touch the
cross areas only, as recommended. If other areas are
touched, the screen can be miscalibrated. A miscalibrated
screen may require an adjustment by an authorized
technician.
22
Learn your Quilt Designer II
if you want
.
. Touch
. Touch the point on the d-
1