Table of Contents
Advertisement
ASSEMBLING THE BOBBIN WINDER
Inspect the package and device for any damages. If there
are no damages, install the main engine to the bottom plate,
with the two screws (1).
Attach the thread guide (2) and the spool pin (3) as
illustrated.
WINDING THE BOBBIN
•
Place the bobbin thread spool on the spool pin (1).
Guide the thread through the thread guide (2), and
through the hole in the tension thread guide (3).
•
Place the thread between the thread tension discs
under the thread tension knob.(4).
•
Place a bobbin on the winding motor (5) and wind a
few turns of thread clockwise around it. Touch the
"Start" button to start winding. The winding motor
stops automatically when the bobbin is full.
1
2
5
4
3
3
2
1
PREPARATIONS – 15
Advertisement
Table of Contents
