Adjust The Decorative Stitches - Husqvarna Quilt Designer II User Manual

Adjust the Decorative Stitches

By using the Quilt Designer II function buttons or the functions in the
ADJUST menu, you can vary the stitches to t your speci c project.
When sewing decorative stitches, always use Husqvarna Viking Tear-
a-way stabilizer. Sew the samples below on a piece of fabric, following
the instructions.
Fabric: Broadcloth or chino, Husqvarna Viking Tear-
A-Way stabilizer.
Touch: Woven medium on the Sewing Advisor, and
stitch N 02 on Stitch d-Card N
1
Thread with: Embroidery thread on top and
embroidery weight bobbin thread.
Use: Presser foot B as recommended.
Sew:
• Place stabilizer under fabric.
• Sew several stitches.
FIX
• Touch at the middle of the stitch, the machine
stops sewing and locks the stitches with several
tiny straight stitches.
Stitch Re-start
Touch stitch re-start to begin at the fi rst stitch of the
decorative stitch. If you have altered stitch width,
stitch length or elongation, it will be remembered.
• Touch Stitch Re-start
• Stitching begins at the start of the stitch.
STOP
The button is used to conclude a stitch, i.e. the
machine fastens the thread and stops au to mat i cal ly
when the sewing of the stitch has been completed.
is cancelled when you press the button again or
by selecting a new stitch.
• As you begin stitching the last stitch, touch
tie off at the end of the stitch.
62
Decorative Sewing
, Fashion.
1
.
to