Setting The Date And Time - Brother MFC-4820C User Manual

Setting the Date and Time

Your MFC displays the date and time, and if you set up the Station ID it
prints on every fax you send. If there is a power failure, you may have
to reset the date and time. All other settings will not be affected.
1
Menu/Set
Press
2
Enter the last two digits of the year.
Menu/Set
Press
3
Enter two digits for the month.
Menu/Set
Press
(For example, enter 09 for
September, or 10 for October.)
4
Enter two digits for the day.
Menu/Set
Press
(For example, enter 06).
5
Enter the time in 24-Hour format.
Menu/Set
Press
(For example, enter 15:25 for 3:25 P.M.)
6
Stop/Exit
Press
whenever the MFC is in Standby mode.
1 2
, , .
.
.
.
.
. The LCD now shows the date and time
GENERAL SETUP
2.DATE/TIME
DATE/TIME
YEAR:20XX
DATE/TIME
MONTH:XX
DATE/TIME
DAY:XX
DATE/TIME
TIME:XX:XX
INITIAL SETUP 4 - 2