Real Time Transmission - Brother MFC-4820C User Manual

Real Time Transmission

When you are sending a fax, the MFC will scan the originals into the
memory before sending. Then, as soon as the phone line is free, the
MFC will start dialing and sending.
If the memory becomes full, the MFC will send the original in real
time (even if REAL TIME TX is set to OFF).
Sometimes, you may want to send an important original immediately,
without waiting for memory transmission.
If you want to fax multiple pages, use Dual Access. (See Dual
Access (Not available for colour faxes) on page 6-10.)
You can set REAL TIME TX to ON for all documents or for the next
fax only.
1
Place the original face down on the scanner glass.
2
Menu/Set
Press
3
To change the default setting, press
to select ON (or OFF).
Menu/Set
Press
Go to Step 5.
—OR—
For the next fax transmission only, press
FAX ONLY.
Menu/Set
Press
4
Press
Menu/Set
Press
5
1
Press if you want to choose more
settings and the LCD will return to
the SETUP SEND menu.
—OR—
2
Press if you have finished choosing
settings for this page, and then go to Step 6.
6
Enter the fax number.
7
Fax Start
Press
If you are sending a colour Fax, the MFC will send it in real time
(even if REAL TIME TX is set to OFF).
2 2 5
, , , .
.
.
to select ON (or OFF).
.
to send the fax.
SETUP SEND
5.REAL TIME TX
to select NEXT
NEXT
1.YES 2.NO
SETUP SEND 6 - 11