Search; Chain Dialing - Brother MFC-4820C User Manual

Search

You can search for names you have stored in the Speed Dial
memory. Press
(See Storing Speed Dial numbers on page 7-1.)
* To seach alphabetically, you can use the dial pad to enter the first
letter of the name you are looking for.

Chain Dialing

You can store very long dialing sequences by dividing them and
setting them up as Speed Dial numbers. Then while dialing, you can
combine two or more Speed Dial numbers and even include manual
dialing using the dial pad. You can use these numbers in any
combination. The combined number will be dialed, in the order you
entered it, as soon as you press
For example:
You store "555" on Speed Dial #01 and "7000" on Speed Dial #02. If
Search/Speed Dial
you press
2 Fax Start
and
number, you can substitute part of the number with manual dialing
using the dial pad. So, if you press
7001
press using the dial pad, you can dial "555-7001".
Using access codes is easy. Sometimes you may want to choose
between several different long distance carriers when you make a
call; rates may vary depending upon the time and destination. To
take advantage of low rates, you can store the access codes or
long-distance carriers as Speed Dial numbers.
6 - 2 SETUP SEND
Search/Speed Dial
, you can dial "555-7000". To temporarily change a
and navigation key to search.
To search numerically
To search alphabetically*
Fax Start
.
# 0 1 Search/Speed Dial
, , , ,
Search/Speed Dial
# 0
, , ,
# 0 1
, , , and