Fiat 500 Owner's Handbook Manual page 53

fig. 60
BEAM ADJUSTMENT fig. 60
The car is provided with electric adjust-
ment of the beams, operating with ignition
key on MAR and low beams on.
The car will slant backwards when it is
loaded, raising the light beam.
In that case, it is necessary to perform
beams adjustment with buttons + and –.
The display provides a visual indication of
the positions during adjustment.
52
Correct positions depending
on load
Position 0 - one or two passengers on
front seats.
Position 1 - 4 passengers.
Position 2 - 4 passengers + load in the
M E N U
boot.
E S C
Position 3 - driver + maximum admitted
F0S0089m
load in the boot.
AIMING THE FRONT FOG
LIGHTS (where provided)
Contact Fiat Dealership to have the head-
lights properly adjusted.
BEAMS ADJUSTMENT ABROAD
Low beams factory adjustment depends
on the country where the car is pur-
chased. When you travel in countries with
different driving direction, to avoid blind-
ing the drivers who travel in the opposite
direction, it is necessary to cover the ar-
eas of the beam according to the provi-
sions of the Highway Code of the country
where you travel.