Fiat 500 Owner's Handbook Manual page 20

Buzzer volume
(Adjusting the failure/warning
buzzer volume)
With this function the volume of the
buzzer accompanying any failure/warning
indication can be adjusted according to 8
levels.
To adjust the volume proceed as follows:
– briefly press button : MENU
previously set volume "level" will flash on
the display;
+ –
– press button or for setting;
– briefly press button MENU
back to the menu screen or press the but-
ton for long to go back to the standard
screen without storing settings.
Button volume
(Button volume adjustment)
This function may be used to adjust the
volume of the beep accompanying the ac-
tivation of buttons MENU
–
can be adjusted according to 8 levels.
To adjust the volume proceed as follows:
– briefly press button : MENU
previously set volume "level" will flash on
; the
ESC
the display;
+
– press button
– briefly press button MENU
back to the menu screen or press the but-
to go
ESC
ton for long to go back to the standard
screen without storing settings.
Belt buzzer (Buzzer activation for
S.B.R. indication)
This function can be only displayed after
Fiat Dealership has deactivated the S.B.R.
+
, and system (see paragraph "S.B.R. system" in
ESC
section "Safety devices").
Service
; the
ESC
(Scheduled servicing)
Through this function it is possible to dis-
play information connected to proper car
–
or for setting;
servicing.
to go
ESC
Proceed as follows:
– briefly press button MENU
vice in km or mi, according to previous
setting, will be displayed (see paragraph
"Units");
– briefly press button MENU
back to the menu screen or press the but-
ton for long to go back to the standard
screen.
: ser-
ESC
to go
ESC
19