Fiat 500 Owner's Handbook Manual page 16

To adjust the brightness, proceed as fol-
lows:
– briefly press button MENU
previously set level will flash on the dis-
play;
+ –
– press button or to set the required
brightness level;
– briefly press button MENU
back to the menu screen or press the but-
ton for long to go back to the standard
screen without storing settings.
Speed beep (Speed limit)
With this function it is possible to set the
, the car speed limit (km/h or mph); when this
ESC
limit is exceeded the driver is immediate-
ly alerted (see section "Warning lights and
messages").
To set the speed limit, proceed as follows:
to go – briefly press button MENU
ESC
display will show the message (Speed
Buzz);
+
– press button
it activation (On) or deactivation (Off);
– when the function is activated (On)
pressing buttons
limit and press MENU
selection.
Note Selection is possible between 30
and 200 km/h, or 20 and 125 mph de-
pending on the selected unit, see para-
graph "Unit of measure". The setting will
increase/decrease by five units each time
button
pressed to increase/decrease the setting
rapidly. Complete the setting by briefly
pressing the button when you approach
, the
ESC
the required setting.
– briefly press button MENU
back to the menu screen or press the but-
–
or to select speed lim-
ton for long to go back to the standard
screen without storing settings.
To cancel the setting, proceed as follows:
+ –
or select the speed
– briefly press button MENU
to confirm
ESC
will flash on the display;
– press button
play;
– briefly press button MENU
back to the menu screen or press the but-
ton for long to go back to the standard
screen without storing settings.
+ – +
/ is pressed. Hold button
to go
ESC
: (On)
ESC
–
: (Off) will flash on the dis-
to go
ESC
–
/
15