Fiat 500 Owner's Handbook Manual page 119

fig. 23
Side
To change the bulb, proceed as follows:
❒ prise in the point indicated by the ar-
row, so as to compress the fixing clip
and extract the assembly B-fig. 23;
❒ turn the bulb holder counterclockwise,
remove the snap-fitted bulb and replace
it;
❒ reinstall the bulb holder into the lens,
then install the assembly B making sure
that the fixing clip has clicked.
118
F0S0138m fig. 24
DIPPED BEAM HEADLIGHTS
To change the bulb, proceed as follows:
❒ remove the protecting rubber cap men-
tioned above;
❒ press the fastener A-fig. 24 and extract
the bulb holder;
❒ remove the snap-fitted bulb and replace
it;
❒ refit the cap locking it properly.
❒ reinstall the rubber cap;
F0S0053m fig. 25
MAIN BEAM HEADLIGHTS
To change the bulb, proceed as follows:
❒ remove the protecting rubber cap men-
tioned above;
❒ release the two bulb holding clips A-
fig. 25;
❒ remove the bulb and replace it;
❒ fit the new bulb, making the outline of
the metallic part coincide with the
grooves on the reflector, then hook
back the bulb holding clips;
❒ reinstall the rubber cap;
F0S0054m