External Lights - Fiat 500 Owner's Handbook Manual

Hide thumbs Also See for 500:
Table of Contents

Advertisement

EXTERNAL LIGHTS

The left-hand stalk operates most of the
external lights. The external lights can on-
ly be switched on when the ignition key
is on MAR. The instrument panel and the
various instrument panel controls will
come on with the external lights.
DAYLIGHT LIGHT (D.R.L.)
(where provided) fig. 32
With the key on MAR and the knurled ring
on O the daylight lights automatically turn
on; the other lights and the internal lighting
do not turn on. The daylight lights auto-
matic switch on function can be en-
abled/disabled using the display menus (see
paragraph "Multifunctional and reconfig-
urable multifunctional display" in this chap-
ter). If daylight lights are disabled, with
knurled ring in position O no light turns on.
WARNING
Daylight lights are an alter-
native to the low beams
during daylight travelling, when they
are mandatory, and their use is al-
lowed when low beams are not
mandatory.
Daylight lights do not replace low
beams when travelling in tunnels or
during the night.
The use of daylight lights is governed
by the Highway Code of the country
you are in. Keep to the rules.
34
fig. 32
LOW BEAMS SIDE/TAILLIGHTS
fig. 32
With the key on MAR turn the knurled
ring to 2. If low beams are activated, day-
light lights are deactivated and taillights and
low beams are activated. The warning light
on the instrument panel will come on
3
at the same time. With ignition key on
STOP or removed, rotate the knurled
ring from position O to position 2. The
light
on the instrument panel turns on
3
and all taillights and number plate lights
turn on.
MAIN BEAMS fig. 32
With knurled ring in position 2, push the
stalk forward toward the dashboard
(steady position). The warning light
on the instrument panel will come on.
They switch off pulling the stalk toward
the wheel (low beams turn on).
FLASHING fig. 32
You can flash the beams pulling the stalk
toward the wheel (unstable position).
F0S0210m
fig. 33
1
The warning light
panel will come on at the same time.
DIRECTION INDICATORS fig. 33
Move the stalk to (steady) position:
up (position a): right-hand indicator
down (position b): left-hand indicator
Warning light ¥ or Î will blink on the in-
strument panel. Direction indicator auto-
matically turn off, when the car travels
again in a straight direction.
Lane change function
If you want to signal that you want to
change lane, move the left stalk to un-
steady position for less than half a second.
1
The direction indicator of the selected
side activates for three blinks and then au-
tomatically turns off.
F0S0211m
on the instrument

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents