Fiat 500 Owner's Handbook Manual page 21

Note The "Service Schedule" requires the
car to be serviced every 30,000 km (or
18,000 mi); this indication will appear au-
tomatically with the key on MAR when
there are 2,000 km left (or equivalent dis-
tance in miles) and will be presented au-
tomatically every 200 km (or equivalent
distance in miles). The indications will ap-
pear more frequently where there are 200
km left. The indication will appear in kilo-
metres or miles according to the settings.
When the next scheduled service opera-
tion is approaching, the message "Service"
will appear on the display followed by the
number of kilometres or miles left when
the key is turned to MAR. Go to the Fi-
at Dealership where the "Scheduled Ser-
vice" operations will be performed and the
message will be reset.
20
Passenger bag
Front passenger's airbag and
side bag activation/deactivation
(where provided)
This function enables to activate/deacti-
vate the front passenger's air bag.
Proceed as follows:
– press button MENU and, after dis-
ESC
playing the message (Bag pass: Off) (to dis-
able) or (Bag pass: On) (to enable) press-
+ –
ing buttons and , press again button
MENU ;
ESC
- the confirmation request message will be
displayed;
+ –
- press buttons or to select (Yes)
(confirming activation/deactivation) or
(No) (to abort);
- briefly press MENU to confirm set-
ESC
ting and go back to the menu screen or
press the button for long to go back to the
standard screen without storing settings.
Daylights (D.R.L.)
This function enables to activate/deacti-
vate the daylight light.
Proceed as follows to switch this function
on or off:
– briefly press button MENU
play the three sub-menus;
– briefly press button MENU
or (Off) will flash on the display (accord-
ing to previous setting);
+ –
– press button or for setting;
– briefly press button MENU
back to the menu screen or press the but-
ton for long to go back to the standard
screen without storing settings;
– hold MENU pressed to go back to
ESC
the standard screen or main menu accord-
ing to the points of the menu where you are
at.
Exit Menu
This is the last function that closes the cir-
cular setting cycle listed in the initial menu
screen.
Briefly press button MENU
back to the standard screen without stor-
ing settings.
–
Press button to return to the first menu
option (Speed Beep).
to dis-
ESC
: (On)
ESC
to go
ESC
to go
ESC