Oven Lamp - John Lewis JLBIOS611 Instruction Manual

Oven lamp

Warning! There is a risk of
electrical shock.
The oven lamp and the lamp glass
cover can be hot.
Before you change the oven lamp:
• Deactivate the appliance.
• Remove the fuses from the fuse box or
deactivate the circuit breaker.
Caution! Put a cloth on the bottom
of the interior of the appliance. It
prevents damage to the lamp glass
cover and the cavity.
Replacing the oven lamp:
1. You can find the lamp glass cover at the
cavity ceiling.
Turn the lamp glass cover
counterclockwise to remove it.
2. Clean the glass cover.
3. If necessary, replace the oven lamp with
applicable 300°C heat-resistant oven
lamp.
Important! Use the same oven lamp type.
4. Install the glass cover.
Ceiling
You can fold down the heating element on
the ceiling to clean the ceiling easily.
Warning! Before you fold down the
heating element deactivate the
appliance. Make sure that the
appliance is cold. There is a risk of
burns!
Folding down the heating element
1.
Remove the shelf supports.
2. Hold the heating element with the two
hands at the front
3. Pull it forwards against the spring
pressure and out along the support on
both sides.
4. The heating element folds down.
The ceiling is ready to clean.
Installing the heating element
1. Install the heating element in opposite
sequence.
Important! Install the heating element
correctly on the two sides above the
support on the inner wall of the appliance.
2. Install the shelf supports.
Door and glass panels
To clean the door, remove it.
Caution! Be careful when you
remove the door from the appliance.
The door is heavy!
Removing the door
1. Open the door as far as it goes.
22