John Lewis JLBIOS611 Instruction Manual page 23

2.
A
Fully press clamping levers (A) on the
two door hinges.
3. Close the door until the first position
(angle approximately 70°).
4. Hold of the door with one hand on
each side and pull it away from the at an
up angle.
To install the door follow the
procedure in reverse.
The number of glass panels if
different for the different models.
Caution! Put the door with the
outer side down on a soft and level
surface to prevent scratches.
Removing and cleaning the door glass panels
1. Remove the door.
2.
B
3.
A
4.
5.
23
Hold the door trim (B) on the top edge
of the door at the two sides and push
inwards to release the clip seal.
Pull the door trim to the front to
remove it.
Hold the door glass panels on their top
edge one by one and pull them up out
of the guide
Clean the door glass panels.
To install panels follow the
procedure in reverse. Install the
smaller panel first, then the larger.