Replacing The Fuses - Yamaha YBR250 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR

Replacing the fuses

The main fuse and the fuse box, which
contains the fuses for the individual
circuits, are located under the seat. (See
page 3-9.)
2
6
1. Main fuse
2. Spare fuse
1. Fuse box cover
2. Headlight fuse
3. Signaling system fuse
4. Fuel injection and ignition fuse
5. Display backup fuse
6. Spare fuse
EAU23624
If a fuse is blown, replace it as follows.
1. Turn the key to "OFF" and turn off
the electrical circuit in question.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage.
Specified fuses:
Main fuse:
20.0 A
Headlight fuse:
10.0 A
Signaling system fuse:
1
10.0 A
Ignition and fuel injection fuse:
10.0 A
Backup fuse:
10.0 A
Spare fuses:
10.0 A and 20.0 A
Do not use a fuse of a higher
amperage rating than recommended
to avoid causing extensive damage
to the electrical system and possibly
a fire.
3. Turn the key to "ON" and turn on
the electrical circuit in question to
ECA10640
6 - 2 6
check if the device operates.
4. If the fuse immediately blows
again, have a Yamaha dealer check
the electrical system.