Handlebar Switches - Yamaha YBR250 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
the "SELECT" button, and then push the
"RESET" button for at least one second.
If you do not reset the fuel reserve
tripmeter manually, it will reset itself
automatically and the display will return
to the prior mode after refueling and
traveling 5 km (3mi).
Clock mode
3
To set the clock:
1. Push the "SELECT" button and
"RESET" button together for at
least two seconds.
2. When the hour digits start flashing,
push the "RESET" button to set the
hours.
3. Push the "SELECT" button, and the
minute digits will start flashing.
4. Push the "RESET" button to set
the minutes.
5. Push the "SELECT" button and
then release it to start the clock.
Fuel meter
With the key in the "ON" position, the
fuel meter indicates the amount of fuel
in the fuel tank. The display segments
of the fuel meter disappear towards "E"
(Empty) as the fuel level decreases.
When the fuel level reaches the bottom
segment near "E", the fuel level warning
indicator and the bottom segment will
flash. Refuel as soon as possible.
3 - 4

Handlebar switches

1. Pass switch" "
2. Dimmer switch " / "
3. Turn signal switch " / "
4. Horn switch " "
1
2
1. Engine stop switch " /
2. Start switch " "
EAU12347
"