Instrument And Control Functions; Main Switch/Steering Lock - Yamaha YBR250 Owner's Manual

Main switch/steering lock

The main switch/steering lock controls
the ignition and lighting systems, and is
used to lock the steering. The various
positions are described below.
OFF ON
LOCK
ON
All electrical circuits are supplied with
power; the meter lighting, taillight and
auxiliary ligth come on, and the engine
can be started. The key cannot be
removed.
The headlight comes on automatically
when the engine is started and stays
on until the key is turned to "OFF"

INSTRUMENT AND CONTROL FUNCTIONS

EAU10460
OFF
All electrical systems are off. The key
can be removed.
LOCK
The steering is locked, and all electrical
systems are off. The key can be
removed.
To lock the steering
1. Turn the handlebars all the way to
the left.
2. Push the key in from the "OFF"
position, and then turn it to "LOCK"
while still pushing it.
3. Remove the key.
EAU10570
1. Push
2. Turn
EAU10660
To unlock the steering
Push the key in, and then turn it to "OFF"
while still pushing it.
EAU10680
1. Push
2. Turn
Never turn the key to "OFF" or
"LOCK" while the vehicle is moving,
otherwise the electrical systems will
be switched off, which may result in
loss of control or an accident. Make
sure that the vehicle is stopped before
turning the key to "OFF" or "LOCK".
3 - 1
3
EWA10060