Cleaning The Air Filter Element - Yamaha YBR250 Owner's Manual

Cleaning the air filter element

The air filter should be cleaned at the
specified intervals. It should be cleaned
more frequently when riding in unusually
wet or dusty areas.
1. Remove panel B. (See page 6-6.)
2
1
1. Air filter case cover
2. Screw
2. Remove the air filter case by
removing the screws.
3. Remove the air filter from the case.
1
1. Air filter element
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU20880
4. Remove the air filter element from
its guide and clean it with solvent.
After cleaning, remove the
remaining solvent by squeezing
the element.
2
5. Apply recommended oil to the
entire surface of the element and
squeeze out the excess oil. It
should be wet but not dripping.
Recommended oil:
Engine oil
6. Insert the air filter element guide
into the air filter and install it in the
case.
7. Install the air filter case cover and
panel by installing the screws.
6 - 1 1
Make sure that the air filter
l l l l l
element is properly seated in the
air filter case.
l l l l l The engine should never be
operated without the air filter
element installed, otherwise the
piston(s) and/or cylinder(s) may
become excessively worn.
ECA10480
6