Replacing The Headlight Bulb - Yamaha YBR250 Owner's Manual

Replacing the headlight bulb

This model is equipped with a quartz
bulb headlight. If the headlight bulb burns
out, replace it as follows.
1. Remove the headlight unit by
removing the screws.
1
1. Screw
2. Disconnect the headlight coupler,
and then remove the bulb cover.
1
2
1. Headlight coupler
2. Bulb cover
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU23780
3. Remove the headlight bulb holder
by turning it counterclockwise, and
then remove the defective bulb.
1.Headlight bulb holder
Headlight bulbs get very hot.
Therefore, keep flammable products
away from a lit headlight bulb, and
do not touch the bulb until it has
cooled down.
4. Place a new headlight bulb into
position, and then secure it with
the bulb holder.
Do not touch the glass part of the
headlight bulb to keep it free from oil,
otherwise the transparency of the
glass, the luminosity of the bulb, and
the bulb life will be adversely affected.
Thoroughly clean off any dirt and
fingerprints on the headlight bulb
using a cloth moistened with alcohol
or thinner.
EWA10790
1. Do not touch the glass part of the bulb
6 - 2 7
5. Install the headlight bulb cover, and
then connect the coupler.
6. Install the headlight unit by
installing the screws
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
ECA10660
6