Replacing The Fuses - Yamaha AG200FEE 2014 Owner's Manual

once a month and fully charge it if
necessary.
3. Fully charge the battery before in-
stallation. NOTICE: When install-
ing the battery, be sure the key
is turned to "OFF", then con-
nect the positive lead before
connecting the
lead.
[ECA16841]
4. After installation, make sure that
the battery leads are properly con-
nected to the battery terminals.
NOTICE
Always keep the battery charged.
Storing a discharged battery can
cause permanent battery damage.
PERIODIC MAINTENANCE AND ADJUSTMENT

Replacing the fuses

The main fuse is located behind panel
A. (See page 7-7.)
negative
2
ECA16531
1. Main fuse
2. Spare main fuse
The auxiliary DC jack fuse is located
behind panel B. (See page 7-7.)
EAU23562
1. Auxiliary DC jack fuse
1
2. Spare fuse
If a fuse is blown, replace it as follows.
7-28
2
1
1. Turn the key to "OFF" and turn off
the electrical circuit in question.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
avoid causing extensive dam-
age to the electrical system and
possibly a fire.
[EWA15132]
Specified fuses:
Main fuse:
20.0 A
Auxiliary DC jack fuse:
10.0 A
1
2
3
4
5
6
7
8
9
10
11
12