Default Settings - Buffalo LS410D User Manual

I28
I46
I47
I52
I54
Steady Amber
While the function LED glows a steady amber, a new firmware version has been released. Update the firmware to new
version.

Default Settings

Administrator's Name
Password
Shared Folders
DHCP Client
Registered Group
Microsoft Network Group Setting
Ethernet Frame Size
SMB2
AFP
FTP
NTP
Print Server
WebAccess
Time Machine
DLNA Server
iTunes Server
BitTorrent
USB Device Server
Update Notification
Formatting USB hard drive.
Data migration or conversion (RAID
migration) is in progress.
Data migration or conversion (RAID
migration) is in progress.
A new firmware version has been
released.
X th backup task has been failed.
admin
password
"share" (for both Windows and Mac computers). The recycle bin is enabled on
"share" by default.
Normally, the LinkStation will get its IP address automatically from a DHCP
server on the network. If no DHCP server is available, then an IP address will
be assigned as follows:
IP address: 169.254.xxx.xxx (xxx is assigned randomly when booting the
LinkStation.)
Subnet mask: 255.255.0.0
"hdusers", "admin", and "guest"
You cannot edit or delete them.
WORKGROUP
1518 bytes (Including 14 bytes of the header and 4 bytes of FCS)
Disabled
Enabled
Disabled
Enabled
Disabled
Disabled
Disabled
Disabled
Enabled
Disabled
Disabled
Enabled
-
Do not turn off the LinkStation power.
Do not turn off the LinkStation power.
Update the firmware.
Make sure X th backup task is configured
correctly. ("X" is backup task number.)
The LinkStation or TeraStation may be in
standby mode. Start the NAS on. If the
backup task still fails, check the status
of NAS, network, and backup source or
destinations.
85