Settings Up A Printer With Windows 8, Windows 7, Or Windows Vista - Buffalo LS410D User Manual

• Don't disable the SMB protocol while the printer server is enabled. If you do, you will need to enable SMB again
and reconfigure the print server from scratch.
Settings up a Printer with Windows 8, Windows 7, or Windows
Vista
1
Connect a printer to the LinkStation's USB port, then turn the printer on.
2
In Advanced Settings, click Services.
3
Move the Print Server switch to the
4
Refer to the manual supplied with the printer and install the printer drivers.
5
Launch NAS Navigator2. Double-click your LinkStation's icon.
6
Double-click the icon of the connected printer (shared name is displayed).
7
Click OK.
8
Select your printer, then click OK.
position to enable the Print Server.
65